Pinkbike.com
Powered by Outside
nickw686
- Member since Apr 6, 2015 O+
- Male / 44
- Squamish , British Columbia
- 8 Followers
- 1,468 Trailforks Points
Recent
nickw686 peppermintcycling's article
Jun 21, 2023 at 8:09
Jun 21, 2023
Peppermint Cycling Announces New MTB Apparel Collection
My partner refuses to wear her old Fox Defend pants after being spoilt by NF DP4 pants. The Fox pants she had had little flex and were too low at the waist. She tried some NF DP4s and bought them immediately and loves them as much as I do, and then bought another colour on sale 2 weeks later. It seems they're a great unisex fit and are bomb proof, mine are almost a year old and I wear them almost daily and have no rips from pedal pins, scuffs or crashes - I can't say the same for my old Fox pants that I also refuse to wear now. Worth the money.
Selling
Mar 6, 2023 at 17:56
Mar 6, 2023Works Components 1.5 Degree EC44-ZS56 Angle Headset
$80 CADLocated in Squamish now - moved from Whistler.
I have a brand new, unused, Works Components 1.5 Degree EC44-ZS56 Angle Headset, which suits a Tapered Steerer Tube - Headtube Length:SET 3 110-119mm. Ready to slacken your bike to hit that gnarly terrain! Cost $155 including import taxes. Wasn't the right one for my bike unfortunately.
Specs:
Fits headtube internal diameter: Upper - 44mm: EC44
Fits headtube internal diameter: Lower - 56mm: ZS56
Upper cup is external (EC) - will fit frames using ZS44 (ZS) upper headcup as standard.
Upper cup insertion depth: 9mm
Lower cup insertion depth: 11.5mm
Upper cup Stack height: 11mm - Total upper stack height including bearing cover: 16mm
Lower cup Stack height: 2.5mm
Upper Bearing: 41mm OD, 45 x 45 Degree AC sealed bearing
Lower Bearing: 52mm OD, 45 x 45 Degree AC sealed bearing
To suit tapered forks.
If you are running a 1 1/8" fork you will need to purchase the reducer crown from the drop down menu - this headset comes as standard with a crown race to suit tapered forks.
Split type 7075-T6 aluminium crown race for simple, tool free installation
Headset comes complete with top-cap (star-nut included), bearings and crown race - all parts required for fitment.
Link to manufacturers' web page: https://www.workscomponents.co.uk/15-degree-ec44-zs56-angle-headset---to-suit-tapered-steerer-tube-138-p.asp
Selling
Feb 7, 2023 at 16:05
Feb 7, 2023Rockshox Reberb 150mm 31.6mm Dropper Post
$50 CADI have a Rockshox Reberb 150mm up for grabs, with remote and SRAM mounting kit. All in good condition, but the dropper post does sink a little so suspect it might need a service, or perhaps it just needed to be bled - I'm not exactly an expert on hydraulic posts :)
Selling
Nov 24, 2022 at 12:13
Nov 24, 2022Maxxis Assegai + DHR2 29 tires - used
$30 CADDoing a bit of a cleanup of spares and came across a couple of Maxxis 29 inch tires in good rideable condition.
Front - Maxxis Assegai WT EXO+ Max Grip 29. Good condition (around 60% life left), seals on tubeless fine. There's a fair amount Stans gunk dried on the inside that you might want to scrape off before using (or don't, whatever ;-)
Rear - Maxxis DHR II WT DoubleDown Max Grip 29. Good condition on the tread (around 80% life left) - I think there is a small cut on the rim near the Maxxis logo so I had trouble getting it to seal tubeless. I can't locate where it was leaking with it off the tire. Also has a puncture patched, but that should hold just fine. Both bits of damage occured during a carbon-rim cracking incident involving a 3' drop to flat directly to a rock that compressed the tire so hard it cracked my poor rim. Probably best for someone who wants to run a tube unless you're a tire repair wizard who wants to fix the rim slit.
$20 each or $30 if you take both. Priced to sell - tires are so expensive these days!
nickw686 mikelevy's article
Nov 23, 2022 at 15:33
Nov 23, 2022
Opinion: What Are Your Worst Bike Habits?
I thought the entire point of mountain biking is Keep Your Damn Wheels off the Ground as much as possible. Are you sure they were telling you the opposite?
8,454 views