makemymountain

This is a 31.8mm diameter Deity Micro DM stem for use with a dual crown fork. It has a small scratch on one side of the stem just from contact with other stem parts in the box, it has never been used on the trail before. I installed it on my Boxxer fork, rode it around the driveway and found out that it was too short for me to use for my liking. BUT my mistake can be your good deal. Price includes shipping costs and will ship to anywhere in the continental USA, I will deal through PayPal or local pickup only.

This is a used Rockshox Superdeluxe Ultimate rear shock with MegNeg can installed. It has a small scratch on the bottom mount of the shock on the underside and comes with 30mm x 8mm mounting hardware. Shock is a trunnion mount on the upper portion and comes with all the adjustments for the Ultimate experience (High speed compression, Low speed compression, Rebound, and MegNeg spacer). Shock has about 40 hours of ride time on it since its last service. Shock has never had a full damper rebuild. Buyer pays shipping and I deal through PayPal or local pick up only. Size is 205mm x 65mm trunnion mounted

This is an unused and pretty much new RockShox Boxxer Ultimate with the Charger 2.1 damper. I installed it on my patrol and rode it on the pavement for a few min but never took it on the trails once. The travel is currently set at 180mm but I will include the 200mm travel air shaft if you wanted to increase the travel. It comes with a flat upper crown and a brand new Deity Direct mount stem installed!! Fork has just been serviced by suspension professionals to make it 180mm of travel and has never been ridden since then. Star nut has been installed and the steer tube has been cut to 6 inches in length which should fit most head tubes. Buyer pays shipping and I deal through PayPal or local pick up only. Crown Race NOT included Included: 1. Rockshox Boxxer Ultimate 29" w/ Charger 2.1 air damper set at 180mm of travel and 44mm offset 2. Deity Intake DM stem (black) 50mm length for a 31.8mm diameter handlebar 3. Flat upper crown 4. 200mm Air Shaft 5. Maxle 20mm x 110mm front axle 6. ODI fork bumpers