KH-4130

Asking for $2200, or make an offer. Feel free to message me with any questions. I can provide additional pictures if requested. Buyer will pay shipping and make payment via PayPal (unless local). Willing to drive to meet up depending on distance. Bike is in good condition and rides great. All bearings are in good condition. Frame has scratches (see pictures). Rear rim is dented in a few places, but holds air when set up tubeless. I will put a tube in the front tire for shipping because the sealant is getting old, but will be tubeless ready. Fork upgraded to Charger Damper and stanchions are in great condition. Various after market part upgrades, see below. FRAME: Size XL, FURIOUS 650B, 200mm travel SHOCK: Rockshox Kage R, 240 x 76 mm, Rebound, 400 lbs (XL) FORK: Rockshox Boxxer RC 650B, 200 mm, Firm (XL), upgraded to charger damper HEADSET: RIDE ALPHA (stock) STEM: Deity Intake 35mm Direct Mount HANDLE BAR: Deity Holeshot 35, 38mm rise, 825mm width, 35mm clamp GRIPS: DMR Deathgrip Lock On BRAKES: SRAM Guide RE, 200 mm / 200 mm SHIFTER: SRAM X5, 9 speed REAR DERAILLEUR: Shimano Zee, 9 speed BOTTOM BRACKET: Raceface Cinch, Press Fit, BB107 CRANKSET: Raceface Atlas Cinch 165mm CHAIN GUIDE: E-Thirteen CHAIN RING: Raceface Narrow Wide Cinch 34T CHAIN: Sram CASSETTE: SRAM PG950 1128T, 9 speed FRONT RIM: Alex Rim FR 32, 32 holes, 25 mm inner REAR RIM: Spank Spike 33 Race FRONT AND REAR HUB: Formula DH, 32 holes, sealed bearings (Stock) FRONT TIRE: Maxxis Minion DHF, 27.5 x 2.5, DH Casing, currently set up tubeless REAR TIRE: Maxxis Minion DHR II, 27.5 x 2.4, DH Casing REAR TIRE INSERT: Tannus Armour Insert with Tube SEATPOST: Ride Alpha DH, 31.6 mm Diameter, Cut down to approximately 4 inches SADDLE: Ride Alpha DH Saddle PEDALS: Chromag Contact ACCESSORIES: Chain stay, seat stay, and downtube protectors, front fender

Frame: Size Large, Aluminum M5 Alloy, 165mm travel Shock: FOX Float Performance DPS, Autosag setup Fork: RockShox Pike RC 650b, 160mm travel Stem: Chromag HiFi V2 Stem, 50mm ext, 35mm clamp Handlebars: Deity Holeshot 35, 38mm rise, 825mm width, 35mm clamp Grips: DMR Brendog Death Grip Front & Rear Brakes: Sram G2 RSC Derailleur: SRAM GX X Horizon, 11speed Shift Lever: SRAM GX, 11 speed Cassette: SRAM XG-1150, 11 speed, 10-42t Chain Ring: SRAM X-Sync Steel 30T x 94mm BCD Chain: SRAM 11 Speed, PC1130 Crankset: SRAM GX1000 Chainguide/guard: MRP SXg Bottom Bracket: SRAM PF30 Pedals: Plastic Rims: Roval 650b, alloy, 29mm inner width, 24/28h Front Hub: Specialized, Hi Lo disc, sealed cartridge bearings, 15mm thru axle Rear Hub: Specialized, Hi Lo disc Front Tire: Continental Trail King 27.5 x 2.4 Rear Tire: Continental Mountain King 27.5 x 2.4 Tubes/Tubeless: Currently set up with tubes, for storage/shipping, but set up to run tubeless Seat: Specialized Dropper Post: eThirteen tRS+ 170mm travel, 30.9mm diameter (cleaned and serviced, could use a re-build kit for better actuation) Alternate Parts Available: Stem: Specialized XC, 6 degree rise, 31.8mm clamp, 60mm ext Handlebars: Specialized, 6000 alloy, 8 degree back sweep, 6 degree upsweep, 25mm rise, 780mm width, 31.8mm clamp Dropper Post: Command Post IRcc, 30.9mm, 125mm travel Description: Asking for $1500, or make an offer. Feel free to message me with any questions. Buyer will pay shipping and make payment via paypal (unless local). Pivot bearings are in good condition, and have been cleaned/re-packed. Front wheel bearings in good condition, rear wheel bearings are brand new. Bottom Bracket is brand new. Frame has scratches and small dent in down tube (see pictures). Fork and shock are in good condition, recently serviced and operate smooth. Rear rim has dents (see picture), but it holds air well when set up tubeless. Bike is currently set up with tubes to prevent sealant from drying up until it is sold. I have the alternate stock parts that are listed that can go on the bike. If you want both sets of parts that is fine, we can adjust the price. I have a RockShox Monarch Plus RC3 Debonair shock that fits the bike but it needs service. I am pretty sure the rebound is stuck in the closed position. I think a rebuild with a new rebound kit might fix it, but I cannot guarantee. If the buyer is interested I can include it in the sale.