Heyworth13

For sale is my much loved Giant Glory 2013 (L) It has had fresh frame bearings at the end of last summer along with fork and shock service and has seen little use this year due to an injury. Spare set of Nukeproof Generator DH wheels to come with the bike for a set of wet tyres. 1 brand new wet scream, 1 nearly new wet scream, Rear DH minion and two onza citius tyres. Also the rear Shimano disc is brand new and unused. On the bike itself is as follows. Size - Large Forks - Rockshox Boxxer R2C2 w/ 20mm axle Shock - Rockshox Vivid R2 Brakes - Avid Elixir 7 Rims - DT Swiss EX-500 Spokes - DT Competition F/ Hub - Giant Tracker R/ Hub - DT 350 Bottom Bracket - Shimano Saint Pedals - Shimano Saint Cranks - Shimano Zee Shifter - Shimano XT Derailleur - Shimano Zee Seat - Nukeproof Handle Bars - Eaton Haven Grips - Troy Lee Stem - Contact DH Direct Mount Enduro Guard. F/ Tyre Maxxis Minion, 1 ride old R/ Tyre Maxxis High Roller 2, 1 ride old

Giant Glory 2008, Had the bike over a year to get back into biking. Sticker bomb to death for a unique look but by all means pull it right off if it's not your cup of tea. Now selling to upgrade. Spec as follows: Frame: Giant Glory, size large. Forks: Fox 40 RC2 tuned and serviced at 'Bounce Cycles' this year. Rear Shock: Fox DHX5 tuned at J-Tech Brakes: Formula R1 (bought new from crc (rrp £418)) Bars: Atherton Star Series, low ride Stem: hope integrated Seat: fun camo Seat clamp: hope Cranks: Shimano Saint Derailleur: Shimano Saint Shifter: Shimano Decore XT rapidfire Headset: FSA (recently changed) Chain Guide: E-Thirteen Hubs: Sun Ringle Abbah DH Rims: Mavic EX729 New rear tyre recently New rear disc at same time. Frame bearings changed this year The bike is not without its faults (hence the price) and I'm honest enough to point them out. -The rear rim has a bit of a flat spot -chain guide is damage on the upper side but still works (will probably need replacing) -the rear derailleur wobbles when you grab it with your hand but don't know if it's a simple fix or not (not the frame or hanger just the component). Still flicks through the gears and it doesn't jump. -the shifter sticks a bit when changing down but after a bit of WD today it retracted fine, might be some mud in the cable. -And finally there is a plenty of paint chips on the rear triangle. Has never bothered me but you might want it respraying.