2014 Santa Cruz Bronson Aluminum Large X1 Build

2014 Santa Cruz Bronson
Aluminum Frame
White/Blue/Grey Color Scheme

Update 9/1/2016: Guide Brakes have been completely rebuilt by LBS and are working great!

Fox 34 150mm fork
Fox Float Kashima shock
Rockshox Reverb Dropper
X1 Shifter, RD, 10-42 Cassette, and Crankset with 32 tooth NW chainring
SRAM Guide RS 180mm Front & Rear
Easton Havoc 750mm aluminum bars
Thomson 0*x70mm stem
Sette Lock on Grips
SRAM 716 Front Wheel
SRAM 746 Rear Wheel (video on profile)
Maxxis High Roller II Front and Rear set up tubeless (almost new)

Bought the bike off Pinkbike back in November. Recently bought a Nomad so time to sell this. I am the third owner and the bikes first two owners were in NC. When I got the bike it was heavily taped but the edges were all peeling and dirt was stuck to the inside edge of all the tape. It looked terrible so I removed it, spent 4 hours removing residue with Goo-Gone, and then washed and waxed it. Since then the bike has taken a few rock chips as bikes in Arizona always do but still looks great aside from a few spots which I took pictures of. According to Strava I have put 269 miles on it since november plus a few rides around the neighborhood so probably about 300 total. All of the bushings are good and operate as they should. The drivetrain and wheels are from the Nomad I just purchased. I went on 2 rides with the nomad and I like the XT shifting over the X1 so I swapped it. Miles are unknown on the X1 setup but it shifts perfectly. If the condition of the Nomad is any indicator to the miles it can't be many. Paypal only unless local, buyer pays shipping and handling. Let me know if you have any questions.